End of the Semester Review

Hello again! I’m so sorry about the long period of radio silence. Things here have been a bit hectic, but I have so many things to talk about so hopefully this might make up for the lack of blog posts. I guess I’ll have to start back way, way back in March right before Spring Break.

DJI_0031-Edit

Shortly before flying back home to New Jersey to start what would be a moderately eventful Spring Break, I bought myself a DJI Mavic Pro! Eagle eyed readers might remember that I bought a drone my freshmen year, and they would be correct. Ultimately I regret to admit that that drone was a waste of money, but the lessons I’ve learned about drone operation and aerial imagery have long stuck with me.

Once I got home to New Jersey, I spent most of my Spring Break helping my parents out at their nail salon, mostly working as a receptionist and interpreter/translator. Whenever I had some down time, I’d fly my drone at the park by my house. It was really fun to get back into the hobby of aerial photography, but I just wish it wasn’t so cold during break.

I love the snow and it was one of the many reasons why I was super excited to fly back home, but I realized that it takes a lot of time, energy, and planning to fly out in the cold. Not to mention, you’re kinda at the mercy of the weather. Thanks to “Winter Storm Stella,” which turned out to be a bust by the way, the weather was pretty lame since it rained and sleeted a lot. Oh well I guess.

_MG_8820

It wasn’t until towards the end of the week that the weather got better so on Friday I spent a day in New York City and spent Saturday packing up my things for my flight back to Orlando on Sunday. And just like that, on that cold Sunday afternoon, I found myself on a train headed back to Newark International Airport so I could start class the next day.

_MG_8883

School for the most part has been pretty challenging as always. I think on the week I came back, or the next week, I had three tests scheduled in a row. Definitely not super ideal, but at this point, this has happened about two times so far this semester so I was kinda used to it. I did ok on one of the tests, while I did a lot better on the other two. However, I didn’t have time to contemplate my test scores because the following Sunday I had to shoot a wedding.

I’ve never done wedding photography before and wedding videography is a whole different animal. I will admit I was super nervous because with weddings, you only get one shot so if you blow it, well you’re out of luck. If I had to do it all over again, I’d definitely hire someone else to shoot video with me because one camera man is definitely not enough to cover everything.

Once I recovered from the wedding, I was handed another project: Completely rebuild the Digital Studio website in four-five days. Thankfully, the time-frame was extended for a total time of about two weeks. Now, before starting this huge undertaking, I was pretty good with WordPress and HTML coding. But, the more time I spent working on the website and trying out different design methods, I felt a lot better about my coding background and attitude towards coding.

A lot of people, like myself, complained that ERG115, the class where you first learn how to code in MATLAB, basically made them hate coding. I totally understand where everyone is coming from, but as I started branching out into other programs and coding languages, I rediscovered my love for coding and problem solving. I guess I needed some time off after doing fprintf(‘Hello world.’); so many times.

_MG_9597-Edit _MG_0837

Somewhere along the way, I was invited by my friend to join him at Sun ‘n’ Fun. For those of you who don’t know, Sun ‘n’ Fun is this huge airshow out in Lakeland, Florida. Many people have compared it to Oshkosh, but I think that’s a bit of an exaggeration, it’s much smaller. Regardless though, I had a lot of fun, but I do wish I’d gone earlier. I went on Sunday with my friend which was the last day of the week-long event, and a majority of the static aircraft, mostly military aircraft, and airshow performers had left. That was ok because I got to see the Blue Angels perform for the first time in my life. After seeing the Thunderbirds perform for three years, this was definitely a welcomed change.

_MG_9011

I also got to go to the Kennedy Space Center Visitor Complex for the first time. I’ve been to Kennedy Space Center and the launch pads, but surprisingly never actually went to the Visitor Complex.

_MG_8915

With my sixth, wow has it really been six?, semester now coming to a close, I’m definitely looking forward to going home for the summer for some R&R. I look forward to taking Thermodynamics at Rutgers and flying my drone a lot more since New Jersey’s airspace isn’t as dense as Daytona Beach’s. I look forward to working either with my family or at a supermarket since I was already offered a job starting when I come home. But, most importantly, I look forward to summer and what it has to offer. Four months is a long time and I look forward to sharing everything when I see you all in August.

For now, good luck, and if you’ve made it this far, thanks for reading.

It’s Crunch Time

Next week is the last week of classes of the 2017 Spring Semester! This also means that “It’s Crunch Time” before we head towards summer. It is time to finish those last semester projects/presentations and study for finals.

On Monday, I have a presentation in my Social Responsibility and Ethics Management class. During the semester, we had to volunteer and do ten hours of community service hours as part of a project called Civil Engagement Project.

The following day, I have a group presentation in my Strategic Management class. We will report on how our company did during the eight rounds simulation. During those rounds, we produced sensors and sold them on the market. We were competing against other groups in our classroom.

Thursday will be my last day of classes at Embry-Riddle Aeronautical University!

There are no classes on Friday as this day is dedicated to studying. My professor in my Aviation Labor Relations course will post our final exam on Canvas (online); we will have two days to complete it.

I will have a total of four “real” final exams that will take place during finals week (Saturday, Monday, Tuesday and Wednesday). My other exams for my other three classes will be taken online.

In just about two weeks on May 8, I will be graduating!

Here are 10 Study Tips to help you prepare for your final exams:

  1. Do not look at the course material for the first time the day before the exam. Most professors mention the dates of assignments, quizzes, and exams during the first week of classes.
  2. Take notes in class and review them on the same day you took them.
  3. Start looking slowly at the material a week or a few days before the test. You will learn and memorize a lot more if you study a little bit every day.
  4. If you created a study guide, try to break it up and study one part at a time. It will be easier if you study it in small chunks instead of reading the whole study guide again and again.
  5. Create a short song or a series of letters when you have to memorize things involving steps or chronology. One time I had to memorize the 6 types of religious conversion. So I just remembered the first letter of each word and it sounded like this IMEARC.
  6. Repeating things loudly or writing them down many times on a sheet of paper will help you to remember the information for the exam.
  7. Quiz yourself or get a friend to ask you some questions. I often use Quizlet to test myself. There is a test option where the website generates a set of questions from the data you have to learn.
  8. Get all the information possible you can from your professor. Sometimes, they will tell you the format of the exam (multiple choices, true or false, short answers, short essays and/or long essays) and the number of questions.
  9. Take a break. Don’t study for hours in one sitting, but take some short breaks and move around.
  10. The night before the test, don’t stay up late at night to study. You should have studied a few days before and be ready. You will do better on the on the exam if you have a good night of sleep.

Good luck on your exams!

Nicolas

Aviation Safety InfoShare 2017

Hello everyone!

I got to attend the Aviation Safety Infoshare at Pittsburg, Pennsylvania from April 18th– April 20th. Aviation Safety InfoShare is a semi‑annual confidential industry-sponsored meeting attended by government and industry safety professionals who share their safety concerns and best practices in a protected environment. InfoShare offers a unique opportunity to advance aviation safety outside of individual air carriers and bring about improvements for the industry by sharing these experiences.Participants at Aviation Safety InfoShare include representatives from—

  • International, major, regional, and corporate operators
  • Pilot, mechanic, dispatch, cabin, ground operations, and air traffic labor groups
  • Aircraft manufacturers
  • Maintenance repair and overhaul organizations
  • Trade associations
  • University aviation departments
  • Government agencies
18053423_1926774074274175_1700144929_o

Grand Ballroom

Id Badge to enter the InfoShare

Id Badge to enter the InfoShare

The host hotel was Wyndham Grand Pittsburg Downtown. I got to attend it with Delta Air Lines. I traveled on company business, and I had my own room at the hotel with a fantastic river view.

18119979_1928769424074640_1501881183_o 18120247_1928769414074641_2023997498_o

View outside my room

View outside my room

The InfoShare was a great opportunity, and I got to talk to a lot of the other airlines. Attendees can only enter the infoshare if they work for an airline and proved it by showing their respective company ID badge. There were even guards at the door making sure no one who didn’t work for an airline entered! I am so thankful that I got to attend the InfoShare and talk to so many aviation professionals!

Until next time,

Maryam

Two Weeks Left!

Hi All!

There are just two weeks of classes left!

Two weeks ago, I had the opportunity to work at Preview Day and talk about Career Services to future students and parents. It was really fun to meet many of the students who will be starting this Fall, and it brought back many memories of when I attended three years ago. If you will be attending ERAU in the future and have the opportunity to attend an open house or Preview Day, I highly recommend it as it helps you get acquainted to campus before you move in!

I have three presentations next week and one other project due. So much to do and so little time it feels like. While it may seem like a lot compared to high school, strong time management skills can help make juggling everything pretty easy while also getting some down time.

Next week, I am presenting a SWOT (Strengths, Weaknesses, Opportunities, and Threats) on San Francisco International Airport in my Airport Management Class; I am also presenting about a lawsuit about airline frequent-flyer programs in my Business Law Class; lastly, I am presenting about the cargo company Atlas Air in my Principles of Transportation Class. Plus, we are starting our sales call project for my Professional Selling Class.

While it is a lot to juggle, all of the presentations are group work which makes it a lot easier when you have a group. Plus, I have a lot of things coming up to look forward to which also helps getting through the crunch time at the end of the semester!

Eight months to graduation…less than a month until I go back to Delta for the summer…and just two weeks of classes left. Boy, time does fly!

Until next time,

Jack

Goodbye, Kentucky and Hello, Florida!

In two weeks, my Spring internship with Space Tango is over. This was sad news for me. I’ve grown attached the this company and their mission. Like I said though, I was sad. Space Tango has asked me to join them AGAIN in the Summer. Now I can’t stop smiling.

I’ll be working part-time in Florida for Space Tango continuing on as their Communication and Marketing intern, but with a  perk – launches! As the company continues to grow, they will have more customer payloads to launch from Cape Canaveral. So although I’ll be doing most of my work online, I’ll only be an hour away from the Space Coast.

I’m certainly excited about this perk, but as their intern this is extremely ideal. I’ll have more access to Florida sources. I’ll also be present for the more intensive mission preparations prior to launch. They also have a location at the Space Life Sciences Lab in Exploration Park which is a great source for new photos and media content to advance their public image as the growing entity they are.

SLSL

My time with Space Tango has been rewarding. I’ve taken a strong liking to this start-up company, and I’m excited to still be a part of their growth in (sometimes) sunny Florida!

⋆ Dani

I Began my Morning with a Little Bit of Gardening

I’m a Communication major and I hope to be a public relations specialist for the aerospace industry. Somehow though, I’ve gotten into a little bit of hydroponic gardening at Space Tango.

garden1

Each glass cup was filled with mulch pebbles surrounding a pod of seeds. Connecting each cup a tubing system that will cycle the water from one cup to the next until it returns back to the water tank. (That’s my hand by the way, doing science things instead of writing.)

This morning the Space Tango biomedical engineer and her intern asked for a little help with a prototype hydroponic system. I had no idea how to even begin such a system, but with a little guidance I soon found myself placing pebbled mulch, seeds, and burlap. A decent amount of duct tape later and we had a fully-functioning hydroponic system. As water flowed from cup to cup, I couldn’t believe I was “just ” a Communication major. I think our positions are what we make of them, but they aren’t meant to be boundaries.

garden2

To the right you’ll see our water tank accompanied by a small pump. Attached to the pump is one end of the tubing. After cycling through each glass cup, the final tubing flows water back into the tank to begin the process again.

garden3

To help contain the mulch and soon-to-be plants, burlap was taped to the surface of each cup. Believe it or not, this was the hardest part for us.

I spent my time here at Space Tango on a computer working on press releases, networking, websites, and social media. Just for today, I spent it in the lab. I got to get a first-hand try of what I report. It’s just a prototype, but it’s a step in the scientific process. It was exciting to be a part of it! As a writer, it’s great to be able to try the things you only get to write about.

⋆ Dani

 

A Week in the West

A couple of weeks ago I had the ability to travel on my last Admissions trip. I traveled to Denver, Seattle, and Los Angeles with the ERAU Admissions team. I was excited to be able to go to Seattle again, since it is where I’m from. These trips are always something I look forward to because we have a lot of fun, while working, of course!

Our first stop was Denver, Colorado. We actually headed out there a day early to take some vacation time in the Centennial State. I had been there once before, but only for about half a day. We were able to spend some time sightseeing in downtown Denver, trying some of the best restaurants, and driving up the mountainside to a lookout. I think we all really appreciated the scenic mountain views, and enjoyed being in a cooler climate for a few days.

17626511_1454448321273766_8088909438209499631_n

View of downtown Denver from our hotel room

 

Famous bear peaking into the Convention Center

Famous bear peaking into the Convention Center

View from Lookout-overlooking Golden, CO

View from Lookout-overlooking Golden, CO

Little Man Ice Cream (SO good!)

Little Man Ice Cream (SO good!)

After our event in Denver, we headed out to my home state, Washington. We were grateful to have two days in Seattle to explore. I was also able to visit with my parents for a bit, which was really nice.

Our group loves coffee, so we went to the Starbucks Reserve Roastery and Tasting Room in Capitol Hill. It is one of the places in Seattle I had never been before, so it was fun to have a new experience in my home city. After tasting a flight of different coffees, I was ready to get back to my favorite order at Starbucks, an Iced Vanilla Latte. Although, it was pretty cool to learn a lot more about the coffee roasting process.

Seattle, WA

Seattle, WA

Starbucks Roastery

Starbucks Roastery and Tasting Room

The next day, we were lucky and we got to see some sunshine in Seattle, which is rare in the winter! We took advantage of the nice weather after our event and went out to Olympic Park, which is about 30 minutes outside of Seattle. It’s a beautiful park with tons of evergreen trees, mountain views, and Puget Sound beachfront. We also went to Kerry Park, which boasts the best views of the Seattle skyline, in my opinion.

Kerry Park in Seattle

Kerry Park in Seattle

We took an evening flight out of Seattle and arrived in Los Angeles around 11pm. Once we arrived in LA, we ended up taking an Uber to our hotel downtown. Let me tell you, there is never a dull moment with the Admissions team… We had some issues getting an Uber driver, and ended up laughing about the whole fiasco the rest of the trip.

We had a short time in LA, so we woke up and hosted the lunch event at a steakhouse downtown. As always, it was a great event! After the event, we quickly changed and headed out to Venice Beach. It is definitely a different vibe in Venice Beach versus Daytona Beach, but we walked around the eclectic beach town and all along the beach during sunset. We ended up going back to the hotel a few hours before our red-eye flight, and watched the planes land and takeoff at LAX while eating some appetizers in the lounge. We had a competition of who could name the type of aircraft the fastest, just like typical Riddle students.

Pablo and I presenting in Los Angeles

Pablo and I presenting in Los Angeles

Pablo and I on bikes in Venice Beach

Pablo and I on bikes in Venice Beach

At last, my final Admissions trip had come to an end. These trips were one of my favorite parts of being a Riddle student because I was able to interact with prospective students, and share my passion for ERAU with them and their families. I will definitely look back on these trips with great memories.

Until next time,

Lindsey

Exploring the World’s Largest Model Railway

Once Aircraft Interiors Expo and the World Travel Catering Expo were over, my friend and I had spare time in the afternoon to visit Hamburg. We used the Hamburg U-Bahn underground and headed to Miniatur Wunderland.

Opened in 2000, Miniatur Wunderland is the world’s largest model railway and also one of the most popular permanent exhibition in Northern Germany. As of today, there are nine sections of the Wunderland which are Hartz/Central Germany, Knuffingen, Alps/Austria, Hamburg, United States, Scandinavia, Switzerland, Knuffingen Airport and Italy. The work is far from over as the team is working on expanding the exhibition thru the following years to come.

The Knuffingen Airport was definitely my favourite section of Miniatur Wunderland. I wonder why?

The Knuffingen Airport was definitely my favourite section of Miniatur Wunderland. I wonder why?

I personally thought the airport was awesome. The designers paid attention to every detail. One thing that is amazing about this airport is that you can visually see the aircraft takeoff and land on the runway. Additionally, the planes can move around the airport and even head to a gate. Once the aircraft is parked at a gate, the jet bridge will move and align with the aircraft’s main door.

A Gate Gourmet truck loaded with beverages and meals.

A Gate Gourmet truck loaded with beverages and meals.

Even the baggage loading vehicles and the catering truck pictured above can move around the airport. The airport, the planes and the small trucks all had lights. You could even see the orange blinker of a truck that was turning left or right at an intersection.

IMG_0024

From back to front: Lufthansa (Boeing 747), Air Berlin (Airbus A330), Air France (Boeing 777), China Eastern (Airbus A330) and Emirates (Boeing 777).

The airport's schedule.

The airport’s schedule.

It was cool to see the actual schedule of the airport published. While looking at the schedule, you could anticipate what aircraft and airline would be the next departure and arrival.

Even though we spent most of our time at the model airport, we managed to visit the nine sections of the exhibition. There was a lot to see!

Grand Canyon, Nevada.

Grand Canyon, Nevada.

Pictured above is the Grand Canyon that can be found in the state of Nevada. It was fascinating to see the lively city of Las Vegas at night.

Train station.

Train station.

Visitors can find railways in multiple sections of the exhibition. Like the airplanes, the  trains move around the cities from station to station.

I would call it a "Centre of Operations."

I would call it the “Centre of Operations.”

It was intriguing to see “behind the scenes” of how everything worked to make this Miniatur Wunderland an attractive place to stop by. I believe these employees were  controlling and monitoring some of the trains, cars, boats, airplanes, aerial tramways, chairlifts, etc. I am sure there is automation involved but they need humans to make everything work perfectly.

I really enjoyed spending a few hours in this “miniature world.” If you visit Hamburg, I would totally recommend you to go take a look. Tickets are only €9 per person!

Until next time!

Nicolas

Aircraft Interiors Expo #AIX2017

Last week, I was in Germany to attend Aircraft Interiors Expo (AIX) in Hamburg Messe. The event welcomed more than 550 exhibitors from all around the world. Every year, more than 14,000 aviation professionals, airlines and international press go to Hamburg for AIX. The event is huge and covers approximately 24,000 metres square (258,334 feet square) of flooring. As you can see below, the large floor plan includes different buildings that are a walking distance from each other.
Runway-Girl-Network-pdf

Below is a list of the major products you can find at Aircraft Interiors Expo:

  • Seats (First, Business Premium Economy and Economy)
  • Seats fabrics
  • Seats armrests
  • Seat power ports (110V and USB)
  • Racks that hold seats on the floor
  • Carpets for flooring
  • Cabin lighting
  • Galley carts
  • Lavatories
  • Inflight Entertainment (IFE)
  • And more!

Major News Announced

  • Zodiac Aerospace unveiled an economy seat for the Boeing 777X.
  • Hawaiian Airlines showed their future A321neo cabin interior by JPA Design
  • Recaro presented the Smart Cabin Reconfiguration for the A320 family. It revealed a quick way to swap seats between higher-density economy and more spacious Eurobusiness seats.
  • Airbus announced a new cabin version of its jumbo jet to accommodate an additional 80 seats.
  • ATR partnered with Geven to offer an increased seat width from 17″ to a more comfortable 18″.
  • Molon Labe updates its Slide-Slip Seat: the aisle seat slips over the middle seat for expedited boarding process.
  • Altran presented an autonomous robot trolley that can drive itself through the aisle.
  • HAECO Cabin Solutions offers a cocktail tray and PDE holder that will be offered on the Vector premium seat.
The-first-class-seats-are-standard-BE-but-the-cabin-divider-feature-is-pleasant-enough.-Image-Hawaiian-Airlines-Custom-1024x853

Hawaiian Airlines A321neos will feature both First Class and Economy seats manufactured by B/E Aerospace. (Photo: Hawaiian Airlines)

World Travel Catering Expo (WTCE)

A l'Olivier, based in Paris, provides olive oil dressing for salads to airlines such as Air Canada.

A l’Olivier, based in Paris, provides olive oil dressing for salads to airlines such as Air Canada.

On the other side of the road was held the World Traveling Catering Expo (WTCE). On-site, visitors had the opportunity to try and sample anything from munchies to First class level cuisine. Many of the major airline catering providers (gategroup, dnata and LSG Group) were at the event. There were also many smaller companies I have never heard before.

There were many small firms that provided important products for the food catering industry, such as the aluminum foil that cover the hot meals in economy. You could also find different sizes of aluminum containers for meals, plastic cups for drinks and various sizes and shapes of cutlery. There were also providers of amenity kits for premium cabins, as well as companies that design crew uniforms.

Overview of one of the two WTCE exhibit.

Overview of one of the two WTCE exhibits.

While walking, I saw a cleaning machine that was spinning vertically to clean galley carts. It sprayed water and soap and the centrifugal force disinfected the beverage trolleys for their next flight. It was pretty amazing to watch!

As an #avgeek, it was impressive to see all those providers. There are so many that you would not think at first. I definitely hope to go back next year for the 2018 edition!

Until next time!

Nicolas

Two Days in Berlin

Victory ColumnHallo!

Early this week, I travelled to Europe with my friend to attend Aircraft Interiors Expo in Hamburg, Germany. Before we arrived in Hamburg, we spent two days in Berlin to visit the city. Here are the cool things we did during our stay:

Victory Column
The first activity we did once we arrived in Berlin was to visit the Victory Column (pictured on the right). From the top of the monument, you are able to view the city. It is located in the centre of a roundabout very close to the Tiergarten, one of the most popular park in Berlin. 

East Side Gallery
The following morning, we took the U-Bahn (subway) and headed to see the Berlin Wall, which is also known as the East Side Gallery. The 1,316 metre (4,318 feet) long section of the wall is covered with various paintings. Many portions of the wall have been damaged by erosion with time and graffitis since some parts are not protected with a fence.

IMG_0019

Brandenburg Gate
This is the city’s only ancient gate remaining. The construction of this landmark started in 1788 and was completed in 1791. What is interesting about it is that it is aligned with the Berlin Victory Column. You can see the tip of it on the picture below.

IMG_4012Topography of Terror
This outdoor and interior museum housed the headquarters of the Gestapo (secret police) during the Third Reich.

Photo: Topography des Terrors

Photo: Topographie des Terrors

Checkpoint Charlie
Checkpoint Charlie was the checkpoint between the American and Soviet sectors of Berlin. After the construction of the Berlin Wall, it primarily served as a crossing point between East Berlin and West Berlin during the Cold War.

IMG_0007

Reichstag
The Italian High Renaissance building served as the seat of parliament in the German Empire. Today, it  functions as the seat of the federal German parliament. 
IMG_0008

Berlin Tempelhof Airport
This was probably one of my favorite part of Berlin. The Tempelhof Airport is an abandoned airport that ceased operations in 2008. The airfield has two parallel runways (09R/27R and 09L/27L) with a length of more than 6,000 feet. It only had one taxiway that was basically circled the runways.

IMG_0005

IMG_0009

We rented bikes for about one hour and rolled down on the runways and taxiways! We saw a Douglas C-54 of the USAAF parked under the terminal  (pictured above) and a Let L-410 Turbojet that was used for fire training purposes. The hour flew by really fast!IMG_0006

 

After our passage through the abandoned airport, we headed to the city’s main railway station (Berlin Hauptbahnhof) to take a train to Hamburg. In my next post, I will talk about Aircraft Interiors Expo 2017 in Hamburg!

Nicolas